Correction LabelsReorder is available for this item.
01. Cutting Size
: This is the trim line where the artwork will be cut/cropped off.
02. Safety Area - 3mm Margin (inward)
: All content in here will not be cropped off. Do ensure that all important content are kept within this area.
03. Working Size - 2mm Margin (outward)
: This is the bleed area whereby this portion will be trimmed away. Make sure that you fill this area with artwork background so that there will no visible white edges in final output, as there is usually a shift of 1-2mm in printing/cutting during production. All files are required to be submitted in the working size.
As there is usually a shift of 1-2mm in printing/cutting during production, do make sure to FILL that image all the way to the edge of the working size.
(Working size = cutting size + 2mm margin bleed on all sides)
For best printing results, we recommend to upload images with resolution of above 300dpi. If your image is of low-resolution,
you can sharpen images by increasing dpi but this will not vastly improve the sharpness, or you can print your desired image (low-res) as it is.
Traces of wordings can be seen when covered with regular art paper label, but with correction label, the wordings are completed hidden.
Back Of Sticker
The gray backing makes the white based sticker paper (printing surface) to be slightly dim in color.
Minimum: 10x10 mm / Maximum: 287x410 mm
Data Production & Ordering
1. Upload Image / PDF Upload
Please upload your desired image either in JPG/PNG or PDF Upload buttons located at the the bottom left of the Editor.
2. Apply Image
Click on the uploaded image on left panel to apply image to the product.
To scale or reposition image: Drag on any corner of the image to resize or move image
Editing Functions (top panel): Arrange/Align, Flip, Sort, Rotate
3. Save & Close
Once applied image has been adjusted to your preference,
click Save & Close at the top right corner to save changes and exit editor.
Material: Correction Sticker
Size Range: From 10x10 (min) to 287x410 mm (max)
*Please make sure that the cutting line is 3mm margin inwards from the working size.