Sketch Pads (Work)Reorder is available for this item.
Cut size is the size of the final print
Cutting errors can cut important data,
so important information or text should work within the safe area
When cutting after printing, the cutting error always occurs
Uncut areas may be visible when trimming errors occur, so trimming allowance is required
The working size is defined as the document size,
including the amount of cutting margin required by the final production.
All data must be received in working size
When printing high quality images over 300 dpi
When printing a low resolution image
with only a high resolution
When printing low-resolution images as they are
01. Cutting Size
: This is the trim line where the artwork will be cut/cropped off.
02. Safety Area - 3mm Margin (inward)
: All content in here will not be cropped off. Do ensure that all important content are kept within this area.
03. Working Size - 2mm Margin (outward)
: This is the bleed area whereby this portion will be trimmed away. Make sure that you fill this area with artwork background so that there will no visible white edges in final output, as there is usually a shift of 1-2mm in printing/cutting during production. All files are required to be submitted in the working size.
As there is usually a shift of 1-2mm in printing/cutting during production, do make sure to FILL that image all the way to the edge of the working size.
(Working size = cutting size + 2mm margin bleed on all sides)
For best printing results, we recommend to upload images with resolution of above 300dpi. If your image is of low-resolution,
you can sharpen images by increasing dpi but this will not vastly improve the sharpness, or you can print your desired image (low-res) as it is.
360도 완전하게 펼쳐져
편리하게 사용할 수 있습니다
(색상 : 블랙 / 지름 : 약 1.5cm)
Drawing 190g을 사용하였으며
수분이나 강한 스크래치에도 종이 변형이 거의 없으며,
번짐 효과가 매우 자연스럽습니다
하드보드 1mm 삽입
Data Production & Ordering
1. Upload Image / PDF Upload
Please upload your desired image either in JPG/PNG or PDF Upload buttons located at the the bottom left of the Editor.
2-1. Apply Image (Front)
Click on the uploaded image on left panel to apply image to the product. To scale or reposition image: Drag on any corner of the image to resize or move image Editing Functions (top panel): Arrange/Align, Flip, Sort, Rotate
2-2. Apply Image (Back)
Click on the Back button to apply image to the product. To scale or reposition image: Drag on any corner of the image to resize or move image Editing Functions (top panel): Arrange/Align, Flip, Sort, Rotate
3. Save & Close
Once applied image has been adjusted to your preference, click Save & Close at the top right corner to save changes and exit editor.
File upload in PDF format
Easy order upload in JPG, PNG, PDF format
Please upload according to the file format.
If you check all of the above choices
You can check the total payment amount.
After finishing uploading the file
You can check in My Page.