Auto Stickers (Motorbikes)Reorder is available for this item.
01. Cutting Size
: This is the trim line where the artwork will be cut/cropped off.
02. Safety Area - 3mm Margin (inward)
: All content in here will not be cropped off. Do ensure that all important content are kept within this area.
03. Working Size - 2mm Margin (outward)
: This is the bleed area whereby this portion will be trimmed away. Make sure that you fill this area with artwork background so that there will no visible white edges in final output, as there is usually a shift of 1-2mm in printing/cutting during production. All files are required to be submitted in the working size.
As there is usually a shift of 1-2mm in printing/cutting during production, do make sure to FILL that image all the way to the edge of the working size.
(Working size = cutting size + 2mm margin bleed on all sides)
For best printing results, we recommend to upload images with resolution of above 300dpi. If your image is of low-resolution,
you can sharpen images by increasing dpi but this will not vastly improve the sharpness, or you can print your desired image (low-res) as it is.
Stickers for outdoors use and enhanced durability, printing very small fonts and graphics may not be clearly visible or readable.
PVC Cast Film
Used on surfaces of airplanes, cars, buses,
skateboards, helmet etc, easily wrapped around
How to Attach
Clean surface before attaching the sticker.
Can be removed and attached easily when applying
heat with a dryer, even a beginner can do it.
Variety Of Shapes & Sizes
Can be produced in various shapes (square, round,
free shape) and sizes from 30 x 30 to 287 x 410 (mm)
You can use this not only on autobikes but also on skateboards, laptops, helmets etc.