MagSafe Ring Area (No Print) Any prints will not be seen on the MagSafe Ring Area. Please ensure
that all important content is avoided on the ring area.

MagSafe Ring Area - Print Shift As there is usually a 2mm printing shift during production, which is
inevitable. The actual output may not be ideal based on the example on the left.

Silver Bumper The silver is paint coated and may be subjected to slight damages
from external heat, moisture and shock.
Do note that this is not a defect and no refund/return can be made for this matter.

Color Printing Color shown in file data and printed output colors may vary. Furthermore, as each piece is produced individually, colors of each piece may differ even if it is the same design file. This is inevitable and no refund or return will be made for this matter.

Print Shift There may be a print shift of 1-2mm during production which is inevitable. This may apply to centralized logos, check patterns or long lines. Do take note of this before working on your design.

Thin Lines Designs with thin lines (less than 0.5mm) may not be printed or express well on the actual output. Please ensure all lines or fonts have a thickness of more than 0.5mm.

Gradation Color Printing may not be express well or may not even be printed on areas of color gradation.
No refund or return will be made for this matter.

Epoxy Material A liquid (epoxy resin) will be injected into the case to create the 3D dome effect and shine. As a result, air bubbles or dust debris may enter during the production process and printed ink may slightly smudge in some areas. This is inevitable. No refund or return will be made for this matter.