The design may not appear in the center and may look slightly uneven as there is a shift during production.
Fabric will be folded on the edges for stitching (area: 10mm).

The actual printed color output on product material (cotton) may differ slightly from the submitted design file seen on the monitor.

Depending on the yarn count of the cotton (10 or 20), it may appear slight transparent and will not be fully opaque.
Passage of light may pass through. (Fabric Posters, Tablewares, Tote Bags, Pouches, Pencil Cases, etc)

Any white colored prints in design file will not be printed.
Please take note of this as there will be no refunds/returns for this matter.

[Overlock]
Ensure that all important content (wordings) in your file are 10mm inwards for the cutting line, to prevent wordings from being covered by stitches.

[No Borders]
Because there will be no stitching borders, fabric will only be printed and cut. Loose ends may occur.
No refunds or returns can be made for this matter.

[Hem Stitch]
The edges will be folded and stitched. Ensure that all important content (wordings) in your file are 10mm inwards for the cutting line.
No refunds or returns can be made if wordings close to edge are lost during stitching.

※ Fabric goods are produced individually and may differ slightly in size, cutting and stitching.

If design has dark colored backgrounds, small fonts (below 8mm) and thin lines may be hard to see.
Please take note of this when working on design.

As the item is of fabric material, some areas with dust and specks of fibers printed on (0.1-0.2mm) may fall off,
since the ink is applied on. This is inevitable. If the color of the design is of darker tones, the ink printed may not be
fully visible and may result in some banding lines. With the above stated, we will nonetheless, do our best
to produce prints to be as even as possible.

Cotton fabric slits shown above may be visible after the production of these materials.
Unfortunately this is inevitable and no refund/return will be provided.

Due to the nature of the woven fabric material, which is unlike paper, printing/cutting may not be even as there will be pulling (tension) of material during production.
Some degree of a slanted trim may be particularly visible if the trimming is of rectangle/square shape.
This is inevitable. Therefore, there is no refund/return for this matter.