The prints will be folded into either vertical or horizontal folds.
For pages that fold inwards, make inward-facing pages 2–3 mm smaller to ensure smooth folding without creases.
Kindly test and check the page order by folding a sample yourself before ordering.
NOTES
Dark backgrounds colours may crack along the folded edges.
For paper weight 150gsm or above, Creasing needs to be selected.
*As dark background designs have a high probability of developing cracks at the folded edges,
any requests for reprints will not be fulfilled unless a matte or glossy coating (which is recommended) is selected.
Work on your design file with reference to the orientations below depending on a horizontal or vertical fold.
There must be a margin of 2-3mm and above for the inward divided folded sides.
Work on your design file according to the below examples.
There must be a margin of 2-3mm and above for the inward divided folded sides.
work on your design file according to the below examples.
For Gate Folds, inner panels must be 2–3mm shorter to prevent overlaps when folded inward.
Work on your design file according to the below examples.
Take note that the center image on inner panels may slightly show when opened.
Inner panels must be at least 2–3mm smaller to ensure proper folding.
Be sure to carefully check the design alignments for both the inner and outer sides.
Inner panels must be at least 2–3mm smaller to ensure proper folding.
Be sure to carefully check the design alignments for both the inner and outer sides.
Inner panels must be at least 2–3mm smaller to ensure proper folding.
Be sure to carefully check the design alignments for both the inner and outer sides.
© 2015-2025 Betterway Systems. All rights reserved.